Fully Assembled Alexmos 3 Axis DIY Box. Box comes ready to plugin. LED Status indicator and Menu Bottom Hard Wired. Option to connect an external LED and menu button in parallel.

• Alexmos 3 Axis board – not stacked
• Headers soldered
• Copper High Dissipation heatsinks mounted
• Custom 5 wire interconnect
• 12AWG or 14AWG power leads soldered and terminated with XT60 connector (Total 5 x Pairs Inlcuded)
• Bluetooth Module Installed
• Board flashed with the latest firmware, default settings loaded and tested for proper operation. NOT TUNED FOR ANY CAMERA
• Various ferrite rings will be included
• Box will mount using standard 2 axis board mounting pattern
• Built-in Menu Button
• Staus/Power LED
• Power Switch
• Alexmos Buzzer Included

Note: The Mounting pattern is 45mm (Standard Alexmos Board Hole Patttern). The 2 boards will need to be unscrewed from the box in order to mount the box. Enough slack provided to remove to the boards. Tuning to be done using Bluetooth module. The 2 axis board will have to be removed in order to access the USB port. If direct access to USB port is needed a whole will have to be drilled.