Alexmos 32bit Joystick with Menu Button and Status LEDs – ELITE

Posted on Leave a comment

Alexmos 32bit Joystick with Menu Button and Status LED – ELITE.

New modular design using generic 8pin Mini DIN Cables. Plug-N-Play with Alexmos 32bit DIY Fully Assembled box. 8pin Mini DIN cable of any length can be used to extend or shorten the joystick cable length. The RED LED indicates power ON/OFF and the GREEN LED will show the controller status such as, command confirmation when you change profiles, I2C errors and general setting errors.

The fully assembled DIY Box comes with JR interconnects all around so replacing the board will be a snap. The box too will have Board Status and Power LEDs and a menu button for quick profile changes, calibration, motor toggle on/off and more.

More details and pictures to come soon.

Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE

Alexmos 32bit Controller Firmware and GUI Download 2.40b8

Posted on Leave a comment

Alexmos 32bit Dual IMU

Alexmos Frame IMU

 

This is the first version of firmware, that is fully compatible with the 2.40 version for 8-bit boards, and have additional features:

  • Allows to connect second IMU to know the frame angle. Advantage is more precise stabiliation and wider range of working angles and more reliable work in Follow Mode. Due to this you don’t need to use connection of external flight controller.
  • Number of profiles extended to 5
  • Additional RC protocols are supported: Futaba s-bus, Spektrum Satellite

Alexmos 32-bit Brushless Gimbal Controller – Basecam

Posted on Leave a comment

32 bit Alexmos Brushless Gimbal Controll newest 32-bit Generation.  This board is to controll 3Axis brushless Camera Gimbals.  We developed our Board to work with 3S-6S We have used special driver IC´s to controll the Motor Driver, that helps to keep te mosfet cool during high current. So it is possible to use 3A for each Motoroutput. The used Fets we used offering a good safety margin.  Our harware support coming softwarefeatures. Like "Reference IMUs", ...   To configure the board you only need the USB Port and the Basecam Software (Windows, OSX, Linux) which you can find here: http://www.basecamelectronics.com/  Or you can use a bluetooth module on the UART Port.  Technical details: Voltage:                             3S-6S Currant for each motor:      3A board dimensions:              50x50 Hole spacing:                     45x45   product contens: - 32bit 3axis Board - MPU6050(Sensor) - I2C cable for Sensor - Basecam Software Licence

Alexmos 32-bit Brushless Gimbal Controller - Basecam

 

32bit Alexmos Controller

* Final product, component layout and color might be different on the production run.

Brushless Gimbal Controll newest 32-bit Generation.

This board is to controll 3Axis brushless Camera Gimbals.

We developed our Board to work with 3S-6S
We have used special driver IC´s to controll the Motor Driver, that helps to keep te mosfet cool during high current.
So it is possible to use 3A for each Motoroutput.
The used Fets we used offering a good safety margin.

Our harware support coming softwarefeatures. Like “Reference IMUs”, …

To configure the board you only need the USB Port and the Basecam Software (Windows, OSX, Linux)
which you can find here:
http://www.basecamelectronics.com/

Or you can use a bluetooth module on the UART Port.

Technical details:
Voltage:                             3S-6S
Currant for each motor:      3A
board dimensions:              50×50
Hole spacing:                     45×45

product contens:

– 32bit 3axis Board
– MPU6050(Sensor)
– I2C cable for Sensor
– Basecam Software Licence

Availability 2 to 3 weeks