5.8GHz 600mW 32 Channel FPV Transmitter

(1 customer review)

$65.00

5.8GHz 600mW 32 Channel FPV Transmitter

In stock

SKU: APFPV600MW Category:

Description

Details

The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with a clean pre-wired harness, and only weighs in at 21g, it’s perfect for a wide range of aircraft!

Features

  • 32 channels: Cover A, B, E bands and F bands
  • Two switching buttons for the band and channel
  • Two digits display for  the band and channel
  • Power off memory for last channel and band
  • Dual Independent video and audio signal outputs

TX TS832 specs:

  • Power input: 7.4-16V (3S Lipo / ~12v suggested)
  • Outputs 12v (matches input voltage)
  • Transmitting power: 600mA
  • Antenna gain: 2db
  • Working current: 220mA at 12V
  • Video bandwidth: 8M
  • Audio bandwidth : 6.5M
  • Weight: 22g
  • Dimension: 54x 32x 10mm (excluding antenna)
  • Video format supported: NTSC/PAL
  • Antenna connection: SMA

Updated 32 Channel Table
*
 This Rx is not compatible with newer ImmersionRC or Fatshark Nexwave Version 3 branded transmitters.

Additional information

Weight 0.25 lbs
Dimensions 3 × 2 × 0.5 in

1 review for 5.8GHz 600mW 32 Channel FPV Transmitter

  1. Carter (verified owner)

    This is a solid transmitter! Unlike some others, it actually measures to the promised 600mW! One thing you’re gonna get with these guys is good quality control and customer service. When I wanted to double check that I was soldering the correct wires, I gave them a call and they walked me through the whole process. I was flying fpv in no time. They mentioned that they would have soldered it for me had i asked in the special instructions upon ordering–although I enjoyed soldering it myself, I didn’t cover the wires back up with shrink wrap because I had to go to class…the wires touched and it fried the DJI FPV hub. I sent it in to the shop, they tested everything, I purchased a new hub, and they soldered everything for me. There is another transmitter that is a bit smaller, weighs less, and comes with a better antenna for the same price– so i’d take a peak at that one first …remember: less weight, longer flight times…but this isn’t a terribly big difference to my knowledge (it came out after my initial purchase) but I am very pleased with this TX and the track record of the product over time.

Add a review