Eagletree Systems eLogger V4 – Heavy Duty Data Logger – 150A

Description

Eagletree Systems eLogger V4

eLogger^TM V4 – the Easiest Way to Monitor your Model’s Power System!

New! Whether you’re into Electric Model Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The eLogger is the product you need to monitor your LiPo, A123 or any other electric power system.

Here are a few of the enhancements with our new eLogger V4:

• High speed logging at up to 50Hz (increased from 10Hz).
• Sixteen times the logging capacity of the standard eLogger V3.   Typically logs all available sensors for about four hours, at 10Hz.
• Voltage logging increased to 80 volts maximum.

The eLogger system comes with everything you need to log, analyze, and graph mAH, Current, Wattage, Voltage and throttle position, right out of the box. And, your eLogger is tremendously expandable, by adding additional sensors (shown below).

Why should I choose the Eagle Tree eLogger?

Some ESC manufacturers are adding data logging to their products. However, these logging capabilities are limited, have very short logging times at high sample rates, and few if any additional sensors are available. While these built-in solutions may “whet your appetite” for data, our eLogger and its incredible array of sensors and powerful software will let you measure virtually anything you will ever need.

Also, investing in logging add-ons that are tied to a particular ESC means that the investment is only good as long as you use that ESC. Eagle Tree telemetry is portable across any ESC brand/model.

Finally, while the ESC manufacturers and others may lose interest in their logging capabilities if they don’t sell well, you can rest assured that Eagle Tree will continue to enhance and expand our eLogger with additional features and sensors. Data is all we do!

 PowerPanel LCD Display – a Gas Gauge for your Pack!

Now you can connect our PowerPanel lightweight LCD Display module to your eLogger!

This ultra thin LCD display connects to the eLogger with the included 11″ data cable, and lets you get your max and live data displayed without a PC, just like the heavier, non-logging WattMeters on the market.

The display is fully programmable to show you your live and max Voltage, Amperage, Wattage Temperatures, RPM, mAH used, and more! Since you can know your mAH after your session, you know approximately how much juice is left in your pack!

Just connect it after your session for readback of live and max data. Or, since the PowerPanel is so light, it can easily be attached to the side of your model for live/max display all the time!

Here are the key features of the eLogger V4: Logs pack current to +/- 100 amps peak (150 amps peak with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts Current is measured with a true Hall Effects Sensor – NOT a power robbing resistance shunt Adjustable logging rate (from 50 samples per second to one sample every 5 minutes) 16 times the logging space of the standard eLogger V3, and lossless data compression. Typically logs all available sensors for about four hours, at 10Hz. All data logged to permanent memory, which retains the data even when the power is removed Fully compatible with our OSD Pro expander Includes Y cable for throttle position logging Great for bench monitoring of battery charging also! Supports the PowerPanel LCD Display Accepts optional inexpensive sensors for three Temperatures, RPM (brushless, magnetic or optical), Airspeed, Altitude, GPS, Servo Current, and more Software computes Wattage, mAH, etc. for complete e-flight data Fully Compatible with Windows 7 (32 and 64 bit), Vista, 98SE, ME, Win2K and XP™ Weighs about 0.8 oz (22 grams). Versions with Wire Leads may weigh slightly more. Comes with our state of the art Windows virtual playback display and graphing software Powerful Graphing software has advanced charting features, such as amps vs volts Internet Updatable firmware – as we add new features or (heaven forbid) have a firmware bug, the update is just a download away! No need to ship hardware back and forth. Full support for English and Metric units. Software has built in English, German and Chinese language.

Here are the key features of the PowerPanel LCD Display: Ultra-thin LCD display connects to the eLogger with the included 11″ data cable. Live Display of Amps, Volts, mAH, Temperatures, Wattage, and RPM (more coming soon, by simply download our latest Windows program). Cumulative mAH display serves as a “gas gauge” for your battery pack.    By knowing how much has been used, you can know approximately how much is left! Up to 4 parameters can be displayed per “virtual page” on the PowerPanel.  Each parameter has a programmable label. Supports Multiple “Pages” of data, with programmable ways of switching between the pages. Supports display of both Live data, and Max values, with programmable ways of switching between Live and Max. Supports “hot plugging” into the eLogger after your session. So light, it can easily be attached to the side of your model for live/max display all the time! System supports both Metric and English units.