Category: News

Brushless Gimbal Motors with Built-In Encoders for Alexmos 32BIT

Posted on by — Leave a comment

Introducing Brushless Gimbal Motors with built-in encoders for Alexmos 32 BIT Brushless Gimbal controllers.

  • GB5010EN Brushless Gimbal Motor with Encoder

    GB5010EN Brushless Gimbal Motor with Encoder

    $86.00
  • GB5015EN Brushless Gimbal Motor with Encoder

    GB5015EN Brushless Gimbal Motor with Encoder

    $92.00
  • EC45EN Brushless Gimbal Motor with Encoder

    EC45EN Brushless Gimbal Motor with Encoder

    $79.00

  • Alexmos Tiny Pro 32 BIT Brushless Gimbal Controller

    $149.00

RC Remote Start Stop (Trigger) for RED

Posted on by — Leave a comment
RC Remote Start Stop (Trigger) for RED

RC Remote Start Stop (Trigger) for RED

Days of wasted media is over. Start and stop your RED whenever you please. Capturing aerial video using your RED got whole lot easier. Introducing the RC (Radio Control) Remote Start Stop for RED Cameras. Plug-N-Play operation with any RC Receiver that outputs PWM signal. Assign a 3 or 2 position switch to a free channel, plug in the 3 pin servo connector to the free channel of the receiver, plug in the sync cable from the trigger device to the RED camera and you are all set.

Specifications:

Operating Voltage: 5V
Current Consumption: 38mA
RC Connector: 3 Pin JR Connector (20CM)
Sync Connector: LEMO 00 4 Pin (50CM)
Weight: 1.3oz (35g)

Alexmos Tiny Pro 32 BIT Brushless Gimbal Controller

Posted on by — Leave a comment
Alexmos Tiny Pro 32 BIT Brushless Gimbal Controller

The latest Alexmos mini controller.
SBGC Tiny Pro

Alexmos Tiny Pro 32 Bit Alexmos Tiny Pro 32 BIT Brushless Gimbal Controller

Alexmos Tiny Pro CNC Aluminum Enclosure 32 BIT IMU

 

Features at a glace:

  • The smallest size
  • The latest DC module
  • One IMU On board
  • SPEKTRUM Interface
  • Max current 2.5A/each motor
  • SH1.0 encoder interface (PWM)
  • SIZE:  57.2mm X 28.2mm X 9.1mm (2.25″ x 1.1″ x 0.35″)

 

Specifications:

Motor Drivers

DRV8313, the same ones on the regular S-BGC boards with continuous current of 1.75A per motor and max current of 2.5A per motor

 

Voltage Regulator

The latest DC module that supports up to 40V (6S recommended) and a new robust 3.3V regulator module for efficiency and reliability.

 

On Board IMU

On board IMU with Master/Slave bridge. The on board IMU can be made the Frame IMU by cutting the bridge. No need for an external frame IMU.

 

On Board Spektrum Interface

Support for Spektrum Satellite receivers

 

SH1.0 Encoder Interface (PWM)

Independent multiplexing encoder interface with separate connections for easy interface

  • Alexmos Tiny Pro 32 BIT Brushless Gimbal Controller

    $149.00