3 axis brushless gimbal gimbal kit for universal aerial applications like FLIR TAU cameras and Zoom Spotter cameras mounted side by side. Payload capacity up to 780g (1.71lbs).
The wait is over. Custom 4mm motor spacer for KDE heavy lift motors with M4*30 and M5*40 mounting hole patterns are now available.
DC7~24V input voltage, DC5V output, very good anti-interference performance, light weight, and long range makes these FPV transmitters ideal for FPV racing and any other demanding FPV application.
Combining ultimate reliability with accurate flight control, the brand-new A3 series of flight controllers is ideal for demanding industrial and cinematic applications where reliability and customization are essential.
[youtube id=”hFZ_d9mbVGU” align=”center” aspect_ratio=”16:9″ maxwidth=”1088″]
The A3 Pro* is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure during flight, it seamlessly switches to another unit to maintain reliability and precision.
*Upgrade the A3 to A3 Pro by installing 2 upgrade kits
The new attitude determination and multi-sensor fusion algorithms improve the A3’s control accuracy. The robust control algorithm enables the A3 and A3 Pro to be adapted to a wide range of aircraft without the need for manual tuning. With a fault-tolerant control system, a hexacopter or octocopter can land safely even in the event of propulsion system failure.
The A3 series provides industry solutions with D-RTK GNSS, smart ESCs, intelligent batteries, and Lightbridge 2. With Onboard and Mobile SDKs, custom-built applications can access flight data, and control the aircraft, gimbal, and camera. Dedicated hardware interfaces including CAN and API ports allow industry experts to craft their ideal aerial system by adding actuators and sensors.
The brand new DJI Assistant 2 is powerful yet simple, making it easy to set up a variety of DJI aerial systems. A new, built-in flight simulator ensures that complex moves can be practiced in advance without risking the aircraft, and a completely overhauled Ground Station supports touch screen interaction, offline mission design, route planning and even formation flight for multiple aircraft
| Flight Modes | · P-Mode (Positioning) · Atti Mode / A-Mode (Attitude) · F-Mode (Function) · Manual mode |
|---|---|
| Return-to-Home Modes | · Smart RTH · Low battery RTH (for DJI Intelligent Flight Battery) · Low voltage RTH (for other LiPo batteries) · Failsafe RTH |
| Safety Features | · Failsafe mode · Low battery level warning (only for DJI Intelligent Flight Battery) · Low battery voltage warning (for other LiPo batteries) · Custom flight altitude and radius limits · No Fly Zones · Motor redundancy (for 6 and 8 rotor platforms) · Motor overload detection · Triple modular redundancy (for A3 Pro) |
| DJI GO App (DJI Lightbridge 2 required) | · Beginner mode · Auto takeoff and landing · Wireless flight controller configuration · Flight data OSD (built-in data recorder) · Intelligent Flight Modes: Course Lock* / Home Lock* / Point of Interest (POI) / Waypoints * Course Lock and Home Lock work without the DJI Lightbridge 2. |
| Supported DJI Equipment | · DJI aerial platforms (e.g. S900, S1000, S1000+) · DJI gimbal systems (e.g. Zenmuse X3 / X5 / X5R/ XT /Z15 A7 / GH4 / 5D ? / BMPCC) · DJI Intelligent Landing Gear · DJI Intelligent Flight Battery |
| Rated Power | · A3: 5 W · A3 Pro: 10 W |
|---|---|
| Rated Peak Power | · A3: 8 W · A3 Pro: 16 W |
| Input Voltage Range | 10.5 – 52 V |
| Static Electricity | · AD: ±8 KV · CD: ±4 KV |
| Operating Temperature | 14° to 113° F (-10° to 45° C) |
| Weight | · Flight Controller: 66 g · GPS-Compass Pro: 60 g · LED Module: 15 g · IMU Pro: 40 g · PMU: 45 g |
| Dimensions | · Flight Controller: 64 mm x 24 mm x 19.5 mm · GPS-Compass Pro: 61 mm (diameter) x 13 mm · LED Module: 27 mm x 27 mm x 8 mm · IMU Pro: 34 mm x 26.5 mm x 20 mm · PMU: 51 mm x 34 mm x 13.5 mm |
A new, specially designed, magnesium core increases the stiffness and rigidity of the Phantom 4 without compromising weight. Working in tandem with the battery, it lifts the center of gravity closer to the level of the props which increases agility and responsiveness. This is all placed within a sleek and aerodynamically efficient shell.
The Phantom 4 is flexible enough to meet different flying demands. In Position mode you can use satellite and Vision Positioning, TapFly, ActiveTrack and Intelligent Flight Modes. Sport mode adds extra agility and speed, reaching 45mph (72kph) while maintaining satellite and Vision Positioning systems. Atti holds the Phantom’s altitude and level but switches off satellite positioning making it ideal for smooth film making movements.
High efficiency motors and a custom designed large capacity battery offers 5350mah of power, giving the Phantom 4 a 28* minute flying time. Integrated power management, balanced charging capabilities plus smart charge and discharge protection keep the battery easy to charge and ready to fly at maximum capacity. Integrated Lightbridge technology allows you to see what the Phantom sees in 720p HD at up to 3.1mi (5km)** away. This low latency video transmission technology is extremely resistant to interference, giving you more control over your flight.
*In calm conditions with constant speed.
**Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations.
We all use our eyes to see and interact with the world. A forward Obstacle Sensing System gives the Phantom 4 it its own pair of eyes, empowering it to see in three dimensions and to react. In Normal Mode if it sees an obstacle coming close it will stop and hover. In TapFly, ActiveTrack and Smart Return Home modes it will avoid the obstacle, or hover to avoid a collision. It also gives you warnings so you always know what is happening to the Phantom. The downward facing Vision Positioning module contains dual cameras and dual ultrasonic sensors to offer five times more positioning accuracy than previous systems. Used indoors, it provides a GPS-like flying experience, giving you the confidence you need to fly indoors.
In TapFly mode, all you have to do to fly is tap on the screen of your smartphone or tablet. To change the direction of flight, you can simply tap the screen to fly anywhere. Flying using control sticks and maintaining altitude, course and speed can be challenging, so TapFly takes over all of these controls for you leaving you to focus on your shot. Using its Obstacle Sensing System, the Phantom 4 can fly places you might not have gone before, to create dynamic and inspiring footage. Through DJI GO you can also activate Smart Return Home which allows the Phantom to avoid obstacles as it returns.
ActiveTrack makes science fiction a reality. Whether you are running, driving, rafting and more, the Phantom 4 uses an advanced combination of computer vision, object recognition and machine learning to track you as you go. Circling a moving object used to only be achievable by the most seasoned of pilots, now everyone can do it with a flick of the thumb. The entire time that ActiveTrack is running obstacle avoidance is too, so it will decide whether it should continue following, avoid an obstacle or simply stop.
Available soon
