Cellpro Dual PowerLab 8 Combo 2

Description

Combo Contents: 1 Cellpro Dual PowerLab 8×2 Battery Workstation, 2 MPA-XH (Multi-Port Safe Parallel Adapters for JST XH equipped battery packs), 2 MPA-to-PL interconnect cables. This combo will allow safe parallel charging of up to six, 2s-8s, same-cell-count LiPo battery packs at one time on each channel. No other adapters or cables are required for operating the Dual PowerLab 8×2 Battery Workstation. To interface the Dual PowerLab 8×2 with a Windows PC, you will require the FUIM3 PC USB Interface, available separately. Please note, in order to use the MPA with the PowerLab series, you must set the PowerLab to XH WIRING MODE either at the PowerLab directly or via the Charge Control Software. For more details, Click here to view product specifications and download Charge Control Software to your PC.

*Note – the new Dual PowerLab 8×2 with EC5-equipped input cables includes a one foot long, 12AWG input wire terminating with an EC5, female pin connector on each channel. Revolectrix also has an available 2 foot long plier clip assembly to support the new version of the Dual PowerLab 8×2. The available cable has the mating EC5 male pin connector-to-plier clips for connecting to a car battery or power supply. Look for this accessory further down on the store page of the web site.