DJI PHANTOM 2 + 3-AXIS ZENMUSE H3-3D New V1.1 w/ Lightbridge Support

$829.00

DJI PHANTOM 2 + 3-AXIS ZENMUSE H3-3D

Out of stock

SKU: PHANTON2H3-3D Category: Tags: , ,

Description

CREATE ASTONISHING AERIALS

The Phantom 2 is unbelievably easy to fly. Combined with smooth, stabilised footage from the H3-3D gimbal, aerial cinematography and videography has never been easier. It’s light, rugged and perfect for travel.

Customized H3-3D Gimbal Support

A customized H3-3D gimbal, designed for easy assembly and connectionis available for the Phantom 2. Its stabilityensures high quality footage and the camera’s pitch can be controlled from the transmitter, allowing pilots to be more creative.

Can-bus Expansion Module for Function Expansion

Functions of the Phantom 2 can be expanded through its Can-bus module, which can be used for IOSD or 2.4 G Bluetooth Datalink.

Easy upgrade to FPV

AV output and video-downlink power cables already installed, ready for upgrade.

Precision Flight and Stable Hovering

Integrated GPS auto-pilot system offers position holding, altitude lock and stable hovering allows attention to be focused on shooting.

25min Flight Time & Intelligent Battery

High capacity, high performance 5200mAh intelligent Lithium Polymer battery offers up to 25 minutes of flight time, with battery capacity data, overcharge/discharge protection and maintenance reminders for greater reliability.

Auto Return-to-Home & Landing

If the Phantom 2 and its controller disconnect during flight for any reason, the Naza-M autopilot system’s failsafe protection will come to the rescue. Outputs of all command sticks on the controller will go to the center position and if the signal is good enough the Phantom 2 will return to home and land automatically. You can also program a One Key Go Home function through the Assistant software.

Intelligent Orientation Control (IOC)

In traditional multirotor flight, forward is tied to the direction of the nose. Using IOC, it flight is much simpler. In Course Lock mode, forward direction is will always be the direction the nose faced at takeoff, while in Home Lock mode forward takes the Phantom 2 back to where it took off. Users can adjust these settings as they please.

Advanced Power Management

Power consumption has been improved by a custom power management system that monitors power capacity and voltage. Low power is indicated by the LED. If power drops below safe levels, the Phantom 2 will land automatically during low battery level.

Easy Battery Replacement

Integrated battery compartment allows for near instant battery changes.

Self-tightening Propeller

Install propellers without worry using self-tightening propellers that only install in the right place. These will also tighten during flight, enhancing safety. All propellers have been carefully and dynamically balanced to eliminate the jello effect.

Kit Items
Phantom 2 Quadcopter
6-Channel Transmitter (TX)
8 x Self-Tightening Props
Landing Gear (Pair)
Phantom 2 Quadcopter Battery
Phantom 2 Vision Battery Charger
USB Cable
Wrench
Limited 1-Year Warranty on Transmitter, MC, and ESC

Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/HERO3+ for Phantom 2
Damping Unit
4 x Spare Vibration Absorbers
4 x Securing Kits
Camera Securing Bracket
8 – Pin Cable
Anti-Interference Board

Additional information

Weight 16 lbs
Dimensions 15 × 15 × 20 in

Reviews

There are no reviews yet.

Be the first to review “DJI PHANTOM 2 + 3-AXIS ZENMUSE H3-3D New V1.1 w/ Lightbridge Support”

You may also like…