DJI Ronin – Professional 3-AXIS Stabilized Handheld Gimbal System

Description

Developed for the film making professional, the DJI Ronin marks a generational leap in camera stabilization technology. Its custom sensors, powerful motors and advanced algorithms put world-class precision in your hands.

 

SAVE TIME ON SET

Once your camera is configured, the Ronin can be ready to shoot in as little as 5 minutes, saving time and increasing efficiency on set. The built-in ATS (Auto Tune Stability) technology intelligently tunes Ronin to your camera rig at the touch of a button.

 

---

 

 

 

 

SMOOTHTRACK CONTROL

Transform tilt and pan movements on the Ronin into smooth and stabilized camera angle changes.

---

3 OPERATION MODES

3 different modes of operation allow the Ronin to be used in different scenarios, all of which can be entered without changing settings on the Ronin Assistant app or a 2nd operator remote. SmoothTrack functionality remains in all three modes.

 

 

Upright Mode

Flip the gimbal over to bring the camera closer to eye level for a higher perspective without straining to lift it. Use this mode when sticking the Ronin out of a car’s sunroof or when trying to shoot over a crowd of people.

 

Underslung Mode

The default gimbal operation is the Underslung mode. The camera can be comfortably held low to the ground, at chest level or anywhere in between. This mode is also used when the Ronin is suspended from a camera jib or crane.

 Briefcase Mode

When a slimmer gimbal profile is needed, i.e. when moving through doorways or narrow paths, Briefcase mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.

---

 

MOBILE BLUETOOTH ASSISTANT SOFTWARE

The feature-rich iOS DJI Assistant software allows easy setup of all system configurations. The PC Assistant also provides control of all the Ronin’s functionalities in addition to firmware upgrades for future features.

 

 

 

 

 

 

 

 

---

 

 

2ND OPERATOR CONTROLLER

An included 2nd operator transmitter allows a 2nd operator to pan, tilt, and roll independent of the Ronin’s movement. SmoothTrack speeds and operation modes can be assigned with 2 custom toggle switches on the transmitter.

---

 

HIGH TORQUE, PRECISION CONTROLLED MOTORS

Motors have been developed with the high performance Ronin in mind. Using FOC control, you can count on high precision, low vibration, and increased torque. Digital Absolute Positioning Encoders in each axis provide the highest levels of accuracy. This combination of custom motor modules and features is found in no other system.

---

 

HIGH PERFORMANCE PROCESSING POWER

A customized, advanced 32-bit floating point DSP processor offers more efficiency than an ARM processor, for faster processing of signals from the onboard encoders.

---

 

QUICK RELEASE TOP HANDLE BAR

The top bar features a quick release system allowing easy attachment and detachment for rapid setup and break down. The same attachment can be used for vehicle or multi-rotor mounting.

---

 

 

 

QUICK SWAP SMART BATTERY
OVER 4 HOURS OF RUNTIME

The Ronin’s customized smart battery is easy to install and simple to charge with the provided charger. Remaining power can be checked directly on the battery. Overcharge and over depletion protection is built-in, as is individual battery cell charge balancing. Expected runtime is over 4 hours, depending on the attached camera rig and gimbal usage.

---

POWER DISTRIBUTION BOX

Two regulated 12V P-taps, one 500mAH full size USB connector, and also a connection point for the DJI Lightbridge Long Range HD Video Downlink are provided. This offers convenient power connection for various accessories including follow focus systems, HD video downlinks and others, all while keeping the wiring to a minimum.

---

PROTECTIVE CARRYING CASE

An extremely strong, durable and water tight carrying case with rolling wheels provides easy transportation. Dense custom cut EVA foam protects the Ronin and accessories.

 

Electrical and Mechanical
Motor Type	3 x Brushless
Working Current	Static Current: 300 mA at 16 V Dynamic Current: 600 mA at 16 V Locked Motor Current: Maximum of 10 A at 16 V
Sensors	IMU (inertial measurement unit) Temperature sensor
Processing	DJI 32-bit DSP processor

Performance
Precision of Control	±0.02°
Maximum Controlled Rotation Speed	Pan Axis: 90°/sec Tilt Axis: 100°/sec Roll Axis: 30°/sec
Controlled Rotation Range	Pan Axis Control: 360° Tilt Axis Control: 45° up to 120° down Roll Axis control: ±25°

Receiver
Frequency	2.4 GHz for proprietary Ronin transmitter
Expandability	1 x Expansion port for third-party D-Bus/PPM receiver

Connectivity
Wireless	Bluetooth for Assistant Software
Wired	1 x Interface for DJI Lightbridge

System Requirements
Assistant Software	Desktop Windows (32- or 64-bit): 8, 7, XP SP3Mobile iOS: 6.1 or above
Hardware	Mobile iPhone: 4s, 5, 5s iPod touch: 4, 5 iPad: 3, 4, mini

General
Supported Camera Dimensions	Maximum depth at center of mass on camera base plate: 5.5″ / 140 mmMaximum height measured from top of camera base plate: 8.9″ / 225 mmMaximum width: 7.7″ / 195 mm
Supported Camera Weight	Up to 16 lb / 7.3 kg
Power Requirements	Battery Type: Ronin 4S Battery Life: Up to 4 hours
Power Output	2 x PowerTap with regulated 12VDC output 1 x USB type A female supplying 500 mW
Operating Temperature	5 to 120°F / -15 to 50°:C
Dimensions (W x D x H)	24.4 x 11 to 18 x 19.7″ / 620 x 280 to 380 x 500 mm
Weight	9.3 lb / 4.2 kg