[wp_lightbox_prettyPhoto_video link=”https://www.youtube.com/watch?v=ADVJxCCAAhk” description=”Alexmos Menu Button Profile Setup Guide” source=”https://aerialpixels.com/wp-content/uploads/2013/05/How-to-install-drivers-and-Flash-Firmware.jpg” title=”Alexmos Menu Button Profile Setup Guide” show_logo=”0″ show_info=”0″]
Tag: Menu button
Alexmos 3 Axis Brushless Gimbal Controller DIY Box Assembled
Posted on — Leave a commentFully Assembled Alexmos 3 Axis DIY Box. Box comes ready to plugin. LED Status indicator and Menu Bottom Hard Wired. Option to connect an external LED and menu button in parallel.
- Alexmos 3 Axis board – not stacked
- Headers soldered
- Copper High Dissipation heatsinks mounted
- Custom 5 wire interconnect
- 12AWG or 14AWG power leads soldered and terminated with XT60 connector (Total 5 x Pairs Inlcuded)
- Bluetooth Module Installed
- Board flashed with the latest firmware, default settings loaded and tested for proper operation. NOT TUNED FOR ANY CAMERA
- Various ferrite rings will be included
- Box will mount using standard 2 axis board mounting pattern
- Built-in Menu Button
- Staus/Power LED
- Power Switch
- Alexmos Buzzer Included
Note: The Mounting pattern is 45mm (Standard Alexmos Board Hole Patttern). The 2 boards will need to be unscrewed from the box in order to mount the box. Enough slack provided to remove to the boards. Tuning to be done using Bluetooth module. The 2 axis board will have to be removed in order to access the USB port. If direct access to USB port is needed a whole will have to be drilled.
30ft Long Custom Joystick Elite for Alexmos
Posted on — Leave a commentCustom order for a camera crane
Alexmos 3 Axis Brushless Gimbal Controller Box – Fully Assembled
Posted on — Leave a comment
Due to large amount of requests and many having issues putting the boards together, we will be releasing the current DIY Box fully assembled and soldered.
What’s included so far:
- Alexmos 3 Axis board – not stacked
- Copper High Dissipation heatsinks mounted
- Custom 5 wire interconnect
- 12AWG or 14AWG power leads soldered and terminated with XT60 connector
- Bluetooth Module Installed
- Board flashed with the latest firmware and tested for operation
- Various ferrite rings will be included
- Box will mount using standard 2 axis board mounting pattern
Alexmos SimpleBGC Joystick with Built In Buzzer
Posted on — Leave a comment[youtube id=”6KM9_HuNOdM” mode=”normal” thumbnail=”https://aerialpixels.com/wp-content/uploads/2013/12/Video-Joystick-Control-Box-for-Alexmos-with-Menu-Button-Built-in-Buzzer-400×267.jpg” grow=”yes”]
