Tag: joystick

Camera Control Joystick for DJI Lightbridge

Joystick for direct connection to lightbridge for camera control.
Pitch and Yaw control of Zenmuse gimbal without secondary radio.

Available soon

June 23, 2015
Proportional Dual Rate Joystick for Movi
Product Description
Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer by Aerialpixels. Compatible with Movi M5, Movi 10 and Movi M15.

Specifications:

Proportional control of Pitch and Yaw

On-the-fly dual rate (2 speed) by button click

3 Click Mode change with Multi-Colored LED

CNC Machined Aluminum Matte Black Finish

Single cable connection to MoVI S-BUS input

Red LED Power Indicator

Plug-N-Play Operation*

65CM Soft and lightweight silicone cable

Weight 65g

Operation:

Proportional operation of pan and tilt axis using the joystick

2 Clicks (2 Quick Presses on the joystick button) – Dual Rate (Dual Speed)

3 Clicks (3 Quick Presses on the joystick button) – Mode Change (RED, BLUE GREEN LED)

Press and hold – Reset the Joystick to Start Up Defaults (Full Speed and Motor Kill)
On the fly dual speed joystick function
Once the joystick is centered, push twice (2 clicks) to change the joystick throw to half rate (half speed). This will reduce the Ronin response by approximately half which will help in making ultra slow movements and corrections. Push the button twice (2 clicks) again to resume full speed movement. When you power up the Ronin with the Joystick plugged in, the joystick will always start on full speed mode. The 2 click function break down

Power up – Full Speed

2 clicks – half speed

2 clicks – full speed

2 click – half speed and so on.

On the fly Mode Change function function

3 clicks on the joystick will change the Modes including Motor-Kill function. When the inputs are set as below the order of operation:

Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer – Aerialpixels.com LLC

(1) Kill (Off) RED LED: This switch position kills power to the M?VI. This is helpful in some cases for setup/initialization or if a wire becomes tangled. In case of any problem or malfunction, the remote operator should immediately activate the kill switch. (2) Majestic Mode BLUE LED: This refers to the mode which allows the M?VI operator to control both pan and tilt axis or just one of them. For some shots, it is helpful for the M?VI operator to be able to control framing as a single operator. Some shots are best executed with the M?VI operator controlling pan, but with the camera operator controlling tilt. (3) Dual Operator Mode GREEN LED: This 3 position switch allows the remote operator to change control modes remotely. The top position is “Remote Operator Mode”, which allows the remote operator to have complete control over the gimbal. In this mode, the person holding the M?VI has no control over the camera’s pan/tilt. One important point is that when completing a shot, it is helpful if the remote operator switches to Majestic Mode, so that the M?VI operator can move freely with the M?VI without tangling wires, etc. Without switching to Majestic Mode, the M?VI will hold its heading regardless of what the M?VI operator does, which can make it difficult to reset the shot. The 3 click button operation will mimic the 3 position switch of the RC Radio. Example Start up Position 1 (Kill – Off) 3 Clicks Position 2 (Majestic Mode) 3 Clicks Position 3 (Dual Operator mode) 3 clicks Position 2 (Majestic Mode) 3 Clicks Position 1 (Kill – Off) 3 Clicks ……….
[product id="10828"]
January 4, 2015
Joystick Controller for Phobotic Centerpiece Controller Now Available!

[product id=”9994″]

October 29, 2014
DJI Ronin Joystick
Plug N Play thumb joystick for DJI Ronin brushless gimbal controller now available..

Specifications:
- Proportional control of Pitch and Yaw
- Single cable connection to DJI Ronin D-BUS input
- Control speed can be adjusted via DJI Ronin Assistant
- Red LED Power Indicator
- Plug-N-Play Operation*
- 65CM Soft and lightweight silicone cable
- Weight 65g
See the DJI Ronin Joystick in action

[wp_lightbox_prettyPhoto_video link=”https://vimeo.com/111043841″ width=”800″ height=”400″ description=”DJI Ronin Joystick” source=”https://aerialpixels.com/wp-content/uploads/2014/10/DJI-Ronin-Joystick.jpg” title=”DJI Ronin Joystick”]

[product id=”9553″]
October 1, 2014
Alexmos 32bit Joystick with Menu Button and Status LEDs – ELITE

Alexmos 32bit Joystick with Menu Button and Status LED – ELITE.

New modular design using generic 8pin Mini DIN Cables. Plug-N-Play with Alexmos 32bit DIY Fully Assembled box. 8pin Mini DIN cable of any length can be used to extend or shorten the joystick cable length. The RED LED indicates power ON/OFF and the GREEN LED will show the controller status such as, command confirmation when you change profiles, I2C errors and general setting errors.

The fully assembled DIY Box comes with JR interconnects all around so replacing the board will be a snap. The box too will have Board Status and Power LEDs and a menu button for quick profile changes, calibration, motor toggle on/off and more.

More details and pictures to come soon.

March 27, 2014