[wp_lightbox_prettyPhoto_video link=”https://www.youtube.com/watch?v=ADVJxCCAAhk” description=”Alexmos Menu Button Profile Setup Guide” source=”https://aerialpixels.com/wp-content/uploads/2013/05/How-to-install-drivers-and-Flash-Firmware.jpg” title=”Alexmos Menu Button Profile Setup Guide” show_logo=”0″ show_info=”0″]
Tag: How to
Stacking 3rd Axis on top of the 2-Axis Alexmos Board V2
Posted on — Leave a comment
Adding Voltage Sensor Capability to V1 & V2 Alexmos Boards
Posted on — 2 CommentsTry this at your own risk. Advanced soldering skills and soldering iron with an extra fine tip needed.
Required parts
1 x 10K Resistor
1 x 33K Resistor
Solder one end of the 10k resistor to (-) Negative Battery Supply pad.|
Solder one end of the 33k resistor to (+) Positive battery Supply pad
Solder the 2 free end together
Solder a wire from pin number 19 of the 328 chip to the point where the 2 resistors are soldered together
Location of PIN 19
Location of PIN 19 shown with the yellow pointer
Completed view
