Tag: diy box

Alexmos 32bit Joystick with Menu Button and Status LEDs – ELITE

Posted on by — Leave a comment

Alexmos 32bit Joystick with Menu Button and Status LED – ELITE.

New modular design using generic 8pin Mini DIN Cables. Plug-N-Play with Alexmos 32bit DIY Fully Assembled box. 8pin Mini DIN cable of any length can be used to extend or shorten the joystick cable length. The RED LED indicates power ON/OFF and the GREEN LED will show the controller status such as, command confirmation when you change profiles, I2C errors and general setting errors.

The fully assembled DIY Box comes with JR interconnects all around so replacing the board will be a snap. The box too will have Board Status and Power LEDs and a menu button for quick profile changes, calibration, motor toggle on/off and more.

More details and pictures to come soon.

Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE Alexmos 32bit Joystick with Menu Button and Status LED - ELITE

Alexmos 3 Axis Brushless Gimbal Controller DIY Box Assembled

Posted on by — Leave a comment

Fully Assembled Alexmos 3 Axis DIY Box. Box comes ready to plugin. LED Status indicator and Menu Bottom Hard Wired. Option to connect an external LED and menu button in parallel.

  • Alexmos 3 Axis board – not stacked
  • Headers soldered
  • Copper High Dissipation heatsinks mounted
  • Custom 5 wire interconnect
  • 12AWG or 14AWG power leads soldered and terminated with XT60 connector (Total 5 x Pairs Inlcuded)
  • Bluetooth Module Installed
  • Board flashed with the latest firmware, default settings loaded and tested for proper operation. NOT TUNED FOR ANY CAMERA
  • Various ferrite rings will be included
  • Box will mount using standard 2 axis board mounting pattern
  • Built-in Menu Button
  • Staus/Power LED
  • Power Switch
  • Alexmos Buzzer Included

Note: The Mounting pattern is 45mm (Standard Alexmos Board Hole Patttern). The 2 boards will need to be unscrewed from the box in order to mount the box. Enough slack provided to remove to the boards. Tuning to be done using Bluetooth module. The 2 axis board will have to be removed in order to access the USB port. If direct access to USB port is needed a whole will have to be drilled. 

  • Alexmos 3 Axis Brushless Gimbal Controller Box Assembled

    Alexmos 3 Axis Brushless Gimbal Controller DIY Box Assembled

Alexmos 3 Axis Brushless Gimbal Controller Box – Fully Assembled

Posted on by — Leave a comment

Alexmos 3Axis DIY Box Assembled

 

Due to large amount of requests and many having issues putting the boards together, we will be releasing the current DIY Box fully assembled and soldered.

What’s included so far:

  • Alexmos 3 Axis board – not stacked
  • Copper High Dissipation heatsinks mounted
  • Custom 5 wire interconnect
  • 12AWG or 14AWG power leads soldered and terminated with XT60 connector
  • Bluetooth Module Installed
  • Board flashed with the latest firmware and tested for operation
  • Various ferrite rings will be included
  • Box will mount using standard 2 axis board mounting pattern