DJI Phantom 2 Charger
- Intelligent Rapid Multi-battery charger plate
- Charge 3 batteries sequentially or at the same time
- On board voltage display
- Batteries will charge to 90% starting from port 1 through 3
- Once all 3 batteries reach 90% charger will start charging to 100% which takes longer with LiPo Batteries.
- DIP Switch to select whether between 1, 2 or 3 batteries
- Support Original Phantom 2.0 charger and the third party adapter!
1. Using the original 2.0 charger as power source:
Default charge mode one by one battery,starting from port 1 , port 2 ending in port 3. If you want 3 batteries charged together turn on the battery by (short press+long press,Same as power on button press for Phantom)
2. For the third party charger:
The Voltage must be at least 12.6V,Otherwise the battery won’t be full filled.
3rd Party charger electric current >6A, DO NOT charge only one battery
3rd Party charger electric current <5A and need charge only one battery,put the battery on the first socket
Battery charging: Battery light-on,
Battery full charged: Battery light-off.
Attention: Never move the charger plate during charging! If loose connection,please turn off power and re-adjust battery, once secured turn on power. This plate has exposed terminals. Use with extreme caution and care.