3 Axis Joystick for MoVI Camera Stabilizer

$475.00

Proportional Dual Rate, Dual Thumb Joystick with full 3 Axis Control for MoVI Camera Stabilizer. Compatible with Movi M5, Movi 10 and Movi M15, these Movi joysticks can be mounted  either side of the top handle bar. Thumb screw adjustable joystick height makes it a easy to adjust the thumb stick position very quickly.

In stock (can be backordered)

SKU: MOVIJOYSTICK3 Category: Tags: , , , , ,

Description

 3 Axis Movi Joystick

Proportional Dual Rate Dual Thumb Joystick with full 3 Axis Control for MoVI Camera Stabilizer by Aerialpixels. Compatible with Movi M5, Movi 10 and Movi M15.

Joystick Setup Instructions

Specifications:

  • Proportional control of Pitch, Yaw and Roll
  • On-the-fly dual rate (2 speed) by button click
  • 3 Click Mode change with Multi-Colored LED
  • CNC Machined Aluminum Matte Black Finish
  • Single cable connection to MoVI S-BUS input
  • Adjustable CNC Aluminum Clamp with Carbon Fiber Plate (Left or Right Handed Mounting capability)
  • Metric tools for Mounting the Joystick Included (2mm and 2.5mm metric allen wrench)
  • Plug-N-Play Operation*
  • 65CM Soft and lightweight silicone cable
  • Weight 65g

Operation:

  • Proportional operation of pan and tilt axis using the joystick
  • 2 Clicks (2 Quick Presses on the joystick button) – Dual Rate (Dual Speed)
  • 3 Clicks (3 Quick Presses on the joystick button) – Mode Change (RED, BLUE GREEN LED)
  • Press and hold – Reset the Joystick to Start Up Defaults (Full Speed and Motor Kill)

On the fly dual speed joystick function

Once the joystick is centered, push twice (2 clicks) to change the joystick throw to half rate (half speed). This will reduce the Movi response by approximately half which will help in making ultra slow movements and corrections. Push the button twice (2 clicks) again to resume full speed movement. When you power up the Movi with the Joystick plugged in, the joystick will always start on full speed mode. The 2 click function break down

  • Power up – Full Speed
  • 2 clicks – half speed
  • 2 clicks – full speed
  • 2 click – half speed and so on.

On the fly Mode Change function function

3 clicks on the joystick will change the Modes including Motor-Kill function. When the inputs are set as below the order of operation:

(1) Kill (Off) RED LED: This switch position kills power to the M?VI. This is helpful
in some cases for setup/initialization or if a wire becomes tangled. In
case of any problem or malfunction, the remote operator should
immediately activate the kill switch.

(2) Majestic Mode BLUE LED: This refers to the mode which allows the M?VI operator
to control both pan and tilt axis or just one of them. For some shots, it
is helpful for the M?VI operator to be able to control framing as a
single operator. Some shots are best executed with the M?VI operator
controlling pan, but with the camera operator controlling tilt.

(3) Dual Operator Mode GREEN LED: This 3 position switch allows the remote operator
to change control modes remotely. The top position is “Remote
Operator Mode”, which allows the remote operator to have complete
control over the gimbal. In this mode, the person holding the M?VI has
no control over the camera’s pan/tilt. One important point is that when
completing a shot, it is helpful if the remote operator switches to
Majestic Mode, so that the M?VI operator can move freely with the
M?VI without tangling wires, etc. Without switching to Majestic Mode,
the M?VI will hold its heading regardless of what the M?VI operator
does, which can make it difficult to reset the shot.

The 3 click button operation will mimic the 3 position switch of the RC Radio. Example

Start up 

Position 1 (Kill – Off)

3 Clicks

Position 2 (Majestic Mode)

3 Clicks

Position 3 (Dual Operator mode)

3 clicks

Position 2 (Majestic Mode)

3 Clicks

Position 1 (Kill – Off)

3 Clicks

……….

 

 

Mode Change in action

 

Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer
Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer

 

 

Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer

 

 

Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer

Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer

Additional information

Weight 0.17 lbs
Dimensions 2.3 × 1.5 × 1.5 in

Reviews

There are no reviews yet.

Be the first to review “3 Axis Joystick for MoVI Camera Stabilizer”

You may also like…