7″ LCD FPV Monitor with Built-in 5.8GHz 32CH FPV Diversity Receiver and Battery

(1 customer review)

$169.00

7″ LCD FPV Monitor with Built-in 5.8GHz 32CH FPV Diversity Receiver and Battery

Out of stock

SKU: APFPV7DIV58BAT Categories: , Tags: , , , , , , , ,

Description

7″ TFT LCD Display with LED Backlight for extra brightness. Built-in 5.8GHz Diversity receiver (Dual Receivers) will automatically switch to the best receiver. 32 channels compatible with fatshark, boscam and DJI transmitters. Built-in 7.4V/1500MAH Li Rechargeable Battery.

Features:

  • Built-in 7.4V/1500MHA Li Battery
  • Dedicated Channel Search key
  • Low battery warning indicator
  • No Blue Screen on Signal Loss
  • Dual buffered AV outputs
  • Capability of receiving 2 different channels at the same time
  • Not affected by 2.4GHz RC Radios
  • AV Receiver with Diversity outputs
  • Small,light weight,durable
  • 32 channels compatible with fatshark, boscam and DJI transmitters

Specifications:       
1.Screen size:7″       
2.Screen style: TFT LCD screen       
3.Physical resolution: 800 x 480       
4.Brightness: 400-450cd/?       
5.Contrast: 500:1       
6.Visual angle: 70°/70° 50°/70°?Level/Vertical?       
7.Working voltage: DC 2S-6S?Circular plug?inner positive &outside negative??          
8. input power:7.2W(DC 12V)       
9.Dimension: 178mm x 118mm x 25mm       
10. 5.8G diversity feature, the stronger wireless signal first       
11.Support  output for  two 5.8G RF AV OUT, one input for AV IN       
12.Support 10 languages menu selection        
13.Working temperature: -10?~+ 65 ?       
14.Operation of key-press:       
   1)The RF key is used to adjust the frequency group (A.B.E.F)       
   2)The SCAN key for automatic scanning channel .       
   3)The CH key is to adjust channels from CH1 to CH8       
   4)Press the+ – key to adjust the brightness.       
   5)Press POWER  key 3 seconds to switch it on, press again  to power off.       
   6)MENU key: press MENU button to enter the menu , then press the MENU key to select the menu items,       
       following press the + -button to adjust the menu items’ coefficient .       
15. Three methods to  exit menu :       
   1)Long press MENU key to exit the menu for 3-4 seconds .       
   2)Without doing anything for 5 seconds to exit the menu automatically .       
   3)Select the exiting item for the menu,and then press the + – key to exit it  . 

16.The right of the LED light  is on when charging,correspondingly out when charging fully.       
17. The blue LED light on the left side represents RF1,the red for RF2 .      

What’s Included in the Package:

  • 1 x 7″ Monitor
  • 1 x Sun Shield (hood)
  • 2 x 5.8GHz 2db antennas
  • 1 x wire set

Updated 32 Channel Table
*
 This Rx is not compatible with newer ImmersionRC or Fatshark Nexwave Version 3 branded transmitters.

Additional information

Weight 2 lbs
Dimensions 8.25 × 6.25 × 2.75 in

1 review for 7″ LCD FPV Monitor with Built-in 5.8GHz 32CH FPV Diversity Receiver and Battery

  1. Carter (verified owner)

    After several months of research, I came across Aerialpixels and spent another month researching the various FPV monitors they offer. I chose this one, and I’m very pleased with it! It’s got a built in battery so you don’t have to worry about anything other than plugging it in. The diversity receiver allows you to use 2 different types of antennas (or two of the same for a wider side to side range w/ 2 patch antennas angled slightly differently) for the best possible reception. It travels well, is durable, and bright enough to get the job done. The sun shade that comes with it is clutch when it’s really bright out.

    The online and over the phone support from Aerialpixels has been among the best i’ve ever received as far as customer service. They’ve been on the phone with me multiple times and helped me out whenever I’ve had issues that I’ve caused myself (my zenmuse ribbon broke and I thought there was something wrong with the RX–easy fix, and they didn’t even see the copter.

Add a review

You may also like…