Proportional Dual Rate Joystick for Movi

Written by

Aerialpixels

in

,

wpid-1290621.jpg

wpid-img_20150104_151724.jpg

 

wpid-img_20150104_151810.jpg

Product Description

Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer by Aerialpixels. Compatible with Movi M5, Movi 10 and Movi M15.

Specifications:

  • Proportional control of Pitch and Yaw
  • On-the-fly dual rate (2 speed) by button click
  • 3 Click Mode change with Multi-Colored LED
  • CNC Machined Aluminum Matte Black Finish
  • Single cable connection to MoVI S-BUS input
  • Red LED Power Indicator
  • Plug-N-Play Operation*
  • 65CM Soft and lightweight silicone cable
  • Weight 65g

Operation:

  • Proportional operation of pan and tilt axis using the joystick
  • 2 Clicks (2 Quick Presses on the joystick button) – Dual Rate (Dual Speed)
  • 3 Clicks (3 Quick Presses on the joystick button) – Mode Change (RED, BLUE GREEN LED)
  • Press and hold – Reset the Joystick to Start Up Defaults (Full Speed and Motor Kill)

 

On the fly dual speed joystick function

Once the joystick is centered, push twice (2 clicks) to change the joystick throw to half rate (half speed). This will reduce the Ronin response by approximately half which will help in making ultra slow movements and corrections. Push the button twice (2 clicks) again to resume full speed movement. When you power up the Ronin with the Joystick plugged in, the joystick will always start on full speed mode. The 2 click function break down

  • Power up – Full Speed
  • 2 clicks – half speed
  • 2 clicks – full speed
  • 2 click – half speed and so on.

On the fly Mode Change function function

3 clicks on the joystick will change the Modes including Motor-Kill function. When the inputs are set as below the order of operation:

Movi Joystick SBUS Settings

Proportional Dual Rate Thumb Joystick for MoVI Camera Stabilizer – Aerialpixels.com LLC

(1) Kill (Off) RED LED: This switch position kills power to the M?VI. This is helpful in some cases for setup/initialization or if a wire becomes tangled. In case of any problem or malfunction, the remote operator should immediately activate the kill switch. (2) Majestic Mode BLUE LED: This refers to the mode which allows the M?VI operator to control both pan and tilt axis or just one of them. For some shots, it is helpful for the M?VI operator to be able to control framing as a single operator. Some shots are best executed with the M?VI operator controlling pan, but with the camera operator controlling tilt. (3) Dual Operator Mode GREEN LED: This 3 position switch allows the remote operator to change control modes remotely. The top position is “Remote Operator Mode”, which allows the remote operator to have complete control over the gimbal. In this mode, the person holding the M?VI has no control over the camera’s pan/tilt. One important point is that when completing a shot, it is helpful if the remote operator switches to Majestic Mode, so that the M?VI operator can move freely with the M?VI without tangling wires, etc. Without switching to Majestic Mode, the M?VI will hold its heading regardless of what the M?VI operator does, which can make it difficult to reset the shot. The 3 click button operation will mimic the 3 position switch of the RC Radio. Example Start up Position 1 (Kill – Off) 3 Clicks Position 2 (Majestic Mode) 3 Clicks Position 3 (Dual Operator mode) 3 clicks Position 2 (Majestic Mode) 3 Clicks Position 1 (Kill – Off) 3 Clicks ……….
  [product id="10828"]  

Comments

Leave a Reply

More posts