Great build from Edgar using Aerialpixels green metric standoffs and green metric screws

Great build from Edgar using Aerialpixels green metric standoffs and green metric screws
The wait is over. Custom 4mm motor spacer for KDE heavy lift motors with M4*30 and M5*40 mounting hole patterns are now available.
DC7~24V input voltage, DC5V output, very good anti-interference performance, light weight, and long range makes these FPV transmitters ideal for FPV racing and any other demanding FPV application.
Combining ultimate reliability with accurate flight control, the brand-new A3 series of flight controllers is ideal for demanding industrial and cinematic applications where reliability and customization are essential.
[youtube id=”hFZ_d9mbVGU” align=”center” aspect_ratio=”16:9″ maxwidth=”1088″]
The A3 Pro* is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure during flight, it seamlessly switches to another unit to maintain reliability and precision.
*Upgrade the A3 to A3 Pro by installing 2 upgrade kits
The new attitude determination and multi-sensor fusion algorithms improve the A3’s control accuracy. The robust control algorithm enables the A3 and A3 Pro to be adapted to a wide range of aircraft without the need for manual tuning. With a fault-tolerant control system, a hexacopter or octocopter can land safely even in the event of propulsion system failure.
The A3 series provides industry solutions with D-RTK GNSS, smart ESCs, intelligent batteries, and Lightbridge 2. With Onboard and Mobile SDKs, custom-built applications can access flight data, and control the aircraft, gimbal, and camera. Dedicated hardware interfaces including CAN and API ports allow industry experts to craft their ideal aerial system by adding actuators and sensors.
The brand new DJI Assistant 2 is powerful yet simple, making it easy to set up a variety of DJI aerial systems. A new, built-in flight simulator ensures that complex moves can be practiced in advance without risking the aircraft, and a completely overhauled Ground Station supports touch screen interaction, offline mission design, route planning and even formation flight for multiple aircraft
Flight Modes | · P-Mode (Positioning) · Atti Mode / A-Mode (Attitude) · F-Mode (Function) · Manual mode |
---|---|
Return-to-Home Modes | · Smart RTH · Low battery RTH (for DJI Intelligent Flight Battery) · Low voltage RTH (for other LiPo batteries) · Failsafe RTH |
Safety Features | · Failsafe mode · Low battery level warning (only for DJI Intelligent Flight Battery) · Low battery voltage warning (for other LiPo batteries) · Custom flight altitude and radius limits · No Fly Zones · Motor redundancy (for 6 and 8 rotor platforms) · Motor overload detection · Triple modular redundancy (for A3 Pro) |
DJI GO App (DJI Lightbridge 2 required) | · Beginner mode · Auto takeoff and landing · Wireless flight controller configuration · Flight data OSD (built-in data recorder) · Intelligent Flight Modes: Course Lock* / Home Lock* / Point of Interest (POI) / Waypoints * Course Lock and Home Lock work without the DJI Lightbridge 2. |
Supported DJI Equipment | · DJI aerial platforms (e.g. S900, S1000, S1000+) · DJI gimbal systems (e.g. Zenmuse X3 / X5 / X5R/ XT /Z15 A7 / GH4 / 5D ? / BMPCC) · DJI Intelligent Landing Gear · DJI Intelligent Flight Battery |
Rated Power | · A3: 5 W · A3 Pro: 10 W |
---|---|
Rated Peak Power | · A3: 8 W · A3 Pro: 16 W |
Input Voltage Range | 10.5 – 52 V |
Static Electricity | · AD: ±8 KV · CD: ±4 KV |
Operating Temperature | 14° to 113° F (-10° to 45° C) |
Weight | · Flight Controller: 66 g · GPS-Compass Pro: 60 g · LED Module: 15 g · IMU Pro: 40 g · PMU: 45 g |
Dimensions | · Flight Controller: 64 mm x 24 mm x 19.5 mm · GPS-Compass Pro: 61 mm (diameter) x 13 mm · LED Module: 27 mm x 27 mm x 8 mm · IMU Pro: 34 mm x 26.5 mm x 20 mm · PMU: 51 mm x 34 mm x 13.5 mm |